Item #: WQ42BC3
Assembly Instructions
For our most current instructions, to request missing, lost or broken parts, or for any other Customer
Revised 09/2010
Parts List
9
9
Hardware List
Wood dowel
Cam bolt
Large cam lock
Small cam lock
Door stopper
Round-head screw
Door stopper plate
Small screw
Handle
Small bolt
Large bolt
Door hinge
Large screw
Shelf support pin
Extra-large screw
Plastic wedge
Medium screw
Wrench
Glue tube
Sticker
Screw cam bolts (B) into top panel (1).
Screw cam bolts (B) into panels (3,4) and slat (28). Insert dowels (A) into panels (3,4) and slats (12,
26,27,28).
Screw cam bolts (B) and insert dowels (A) into panels (5,6). Attach door stoppers (E) to panels (5,6)
using round-head screw (F). Flip panels (5,6) over and screw in cam bolts (B).
Insert dowels (A) into shelves (7,8).
Screw cam bolts (B) and insert dowels (A) into panels (14,15,16,17). Insert dowels (A) into shelves
(19,20,21).
Screw cam bolts (B) into doors (13,18) and drawer front (24). Attach handles (I) to doors (13,18) and
drawer front (24) using small bolts (J). Attach door stopper plates (G) to doors (13,18) using small
screws (H).
Attach slats (26,27) to slat (28) using cam bolts as guides. Insert cam locks (C) into slats (26,27) and
tighten with a screwdriver.
Attach shelves (19,20) to panels (16,17) using cam bolts and dowels as guides. Insert cam locks (C)
into shelves (19,20) and tighten with a screwdriver. Note that two cam locks will be inserted into each
shelf.
Attach shelves (19,21) to panels (14,15) using cam bolts and dowels as guides. Insert cam locks (C)
into shelves (19,21) and tighten with a screwdriver. Note that two cam locks will be inserted into each
shelf.
Attach the shelf assembly from Step 8 to door (18) using cam bolts and dowels as guides. Insert cam
locks (C) into panels (16,17) and tighten with a screwdriver. Note that three cam locks will be
inserted into panel (16) and two will be inserted into panel (17).
Attach the shelf assembly from Step 9 to door (13) using cam bolts and dowels as guides. Insert cam
locks (C) into panels (14,15) and tighten with a screwdriver. Note that two cam locks will be inserted
into panel (14) and three will be inserted into panel (15).
Attach panels (5,6) to panel (7) and slat (12) using cam bolts and dowels as guides. Insert cam locks
(C) into panel (7) and slat (12) and tighten with a screwdriver. Note that four cam locks will be
inserted into panel (7), and two will be inserted into slat (12).
Attach shelves (8) to the frame assembly from Step 12, then attach panel (3) to shelves (8) using
cam bolts and dowels as guides. Insert cam locks (C) into shelves (8) and tighten with a screwdriver.
Note that two cam locks will be inserted into each shelf.
Attach shelves (8) to the opposite side of the frame assembly from Step 12, then attach panel (4) to
shelves (8) using cam bolts and dowels as guides. Insert cam locks (C) into shelves (8) and tighten
with a screwdriver. Note that two cam locks will be inserted into each shelf.
4
6
5
3
Attach the frame assembly from Step 14 to top panel (1) using cam bolts and dowels as guides.
Insert cam locks (C) into panels (3,4,5,6) and tighten with a screwdriver.
Slide back panels (10,11) into the frame assembly. Note that the back panels will slide down in the
grooves along the back of the frame assembly.
Attach bottom panel (2) to the frame assembly using large bolts (K) and wrench (T).
Attach the base assembly from Step 7 to the frame assembly by inserting the dowels of the base
assembly into the pre-drilled holes of bottom panel (2).
Attach hinges (L) to panels (15,16) using large screws (M).
Attach the door (16,17) assembly to the stand assembly at hinges (L) using large screws (M).
Attach the door (14,15) assembly to the stand assembly at hinges (L) using large screws (M).
Insert shelf support pins (N) into the stand assembly at desired shelf height. Carefully place shelf (9)
onto shelf support pins (N).
Attach drawer sides (21,22) to drawer back (23) using extra-large screws (P). Slide drawer bottom
(25) into the drawer assembly. Attach drawer front (24) to the drawer assembly using cam bolts as
guides. Insert small cam locks (D) into drawer sides (21,22) and tighten with a screwdriver.
Carefully slide the drawer into the stand assembly.
10
11
10
Secure back panels (10,11) using plastic wedges (R) and medium screws (S).
|
Tascam MP3 Player DR 701D User Manual
Toshiba Copier E STUDIO555 User Manual
Toshiba DVD Player HD A3KC User Manual
Toshiba Projection Television 46H84C User Manual
Tripp Lite Surge Protector 10+TEL DBS User Manual
Ultra Products Network Card ULT40127 User Manual
Verilux Indoor Furnishings PL04 User Manual
ViewSonic eBook Reader VEB612 User Manual
Vizio Blu ray Player VBR337 User Manual
Wayne Water Pump 353501 001 User Manual